（1）吴学仁，童第华，徐武，赵晓辰.断裂力学的权函数理论与应用.js333国际线路检测工业出版社，2019.

（2）Bo Zhang, Wu Xu*, Xueren Wu, Yin Yu, Dengke Dong. Stress intensity factors and plastic zones of stiffened panels with multiple collinear cracks. Theoretical and Applied Fracture Mechanics, 2020:110:102816.

（3）W Xu*, JC Ding. Correction of the large displacement effect on determination of mode I interlaminar fracture toughness of composite. Engineering Fracture Mechanics 2020;238:107279.

（4）W Xu*, C Zhang, X R Wu, Y Yu. Weight function method and its application for orthotropic single edge notched specimens. Composite Structure, 2020, 252：112695.

（5）W Xu*, DY Rao, XR Wu, DH Tong, XC Zhao. Wide-range and accurate mixed-mode weight functions and stress intensity factors for cracked discs. Fatigue & Fracture of Engineering Materials & Structures 2020; 43: 1022-1037

（6）Wu Xu*, ZZ Guo, Y Yu, A combined strain and compliance method for improving ASTM D6671 to measure the mixed modes I/II interlaminar fracture toughness. Composite structures 2019; 221:110867

（7）ZX Liu, W Xu*, Y Yin, XR Wu. Weight functions and stress intensity factors for two unequal-length collinear cracks in an infinite sheet. Engineering Fracture Mechanics 2019; 209:173-186.

（8）W Xu*, ZZ Guo, Y Yu, J Xiong, Y Gao. Experimental and analytical characterizations of finite interlaminar crack growth of 2D woven textile composites. Composite Structures 2018; 206: 713–721.

（9）XR Wu*, DH Tong, XC Zhao, W Xu. Review and evaluation of weight functions and stress intensity factors for edge-cracked finite-width plate. Engineering Fracture Mechanics 2018; 195:200-221.

（10）W Xu*, ZZ Guo. A simple method for determining the mode I interlaminar fracture toughness of composites without measuring the growing crack length. Engineering Fracture Mechanics 2018; 191: 476-485.

（11）W Xu*, XR Wu, Y Yu, ZH Li. A weight function method for mixed modes hole-edge cracks. Fatigue and Fracture of Engineering Materials and Structures 2018; 41(1):223-234.

（12）W Xu*, XR Wu, Y Yu. Weight function, stress intensity factor and crack opening displacement solutions to periodic hole-edge cracks. Fatigue and Fracture of Engineering Materials and Structures 2017; 40: 2068–2079.

（13）W Xu*, AM Waas*. Multiple solutions in cohesive zone models of fracture. Engineering Fracture Mechanics 2017; 177: 104-122.

（14）W Xu, AM Waas*. Fracture toughness of woven textile composites. Engineering Fracture Mechanics 2017; 169: 184-188.

（15）W Xu, AM Waas*. Modeling damage growth using the crack band model; effect of different strain measures. Engineering Fracture Mechanics 2016; 152: 126-138.

（16）W Xu, SI Thorsson, AM Waas*. Experimental and numerical study on cross-ply woven textile composite with notches and cracks. Composite Structures 2015; 132: 816-824. 

（17）W Xu, AM Waas*. Modeling the axial splitting and curling of metal tubes under crush loads. Computers, Materials & Continua 2015; 46(3): 165-194

（18）W Xu, AM Waas*. A novel shell element for quasi-static and natural frequency analysis of textile composite structures. Journal of Applied Mechanics 2014; 81(8)

（19）W Xu, H Wang*, XR Wu, X Zhang, G Bai, X Huang. A novel method for residual strength prediction for sheets with multiple site damage: Methodology and experimental validation. International Journal of Solids and Structures 2014; 51 (3), 551-565

（20）W Xu, Wu XR*. Weight functions and strip-yield model analysis for three collinear cracks. Engineering Fracture Mechanics 2012; 85:73-87

（21）W Xu, Wu XR*, Wang H. Weight functions and strip yield solution for two equal-length collinear cracks in an infinite sheet. Engineering Fracture Mechanics 2011; 78(11): 2356-2368

（22）XR Wu*, W Xu. Strip yield crack analysis for multiple site damage in infinite and finite panels–A weight function approach. Engineering Fracture Mechanics 2011; 78(14): 2585-2596.

（23）Y Shen*, J Wang, W Xu. Nonlinear features of guided wave scattering from rivet hole nucleated fatigue cracks considering the rough contact surface condition. Smart Materials and Structures 2018; 27:105044.

（24）XR Wu*, XC Zhao, W Xu, DH Tong. Discussions on weight functions and stress intensity factors for radial crack(s) emanating from a circular hole in an infinite plate. Engineering Fracture Mechanics 2018; 192: 192-204.

（25）李政鸿,徐武*,张晓晶,余音.多孔多裂纹平板的疲劳裂纹扩展实验与分析方法. js333国际线路检测学报 2018;39(7):221867-1~8.

（26）郭壮壮,徐武*,余音. 低温环境下测试复合材料I 型层间断裂韧性的简易方法. 复合材料学报.2019;36(5):1210-1215.

（27）王幸,徐武,张晓晶*,张丽娜,胡本润.TC4板冷挤压强化寿命预测与试验验证.浙江大学学报 2017;51(8):1610-1618.

（28）徐武,张晓晶,汪海,汤超.含多裂纹铝板的剩余强度评估.南京js333国际线路检测航天大学学报 2010; 3(46): 330-334.